Sr-Mini (Modbus Rtu) - Fuji Electric Monitouch V9 Series Connection Manual

16.1.3 SR-Mini (MODBUS RTU)

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
SR-Mini
DIP switch
Switch
1
2
3
4
Slave address setting switch
Switch
0
Available Device Memory
The available setting range of device memory varies depending on the controller model. Be sure to set within the range
available for the controller to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory
---
Setting
1 : 1 / 1 : n / Multi-link2 /
Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
9600 / 19200 bps
None / Odd / Even
1 to 16
Setting Contents
ON
Modbus communication
8 bits / 1 bit / without parity
ON
ON
Baud rate: 9600 bps
OFF
Setting
0 to F (= 1 to 16)
TYPE
00H
16.1 Temperature Controller/Servo/Inverter Connection
8 bits
1 bit
OFF, ON: 4800 bps
ON, ON: 19200 bps
The number that is one greater than the set value is the address.
(Underlined setting: default)
Remarks
Remarks
Remarks
Remarks
16-5