Kv-700 (Ethernet Tcp/Ip) - Fuji Electric Monitouch V9 Series Connection Manual

5-8 5. KEYENCE
5.1.5

KV-700 (Ethernet TCP/IP)

Communication Setting
Editor
Make the following settings on the editor. For more information, see "1.3.2 Ethernet Communication".
 IP address for the V9 unit
- When specified on the screen program:
[System Setting]  [Hardware Setting]  [Local Port IP Address]
- When specified on the V9 unit:
Local mode  [LAN Setting]
 Port number for the V9 unit (for communication with PLC)
[System Setting]  [Hardware Setting]  [PLC Properties]  [Communication Setting]
 IP address and port number of the PLC
Register on the [PLC Table] in [System Setting]  [Hardware Setting]  [PLC Properties]  [Target Settings].
PLC
KV-LE20
Unit editor setting
Item
Baud Rate
IP Address
Subnet Mask
Port Number (KVS, DB)
* These settings can be checked on the access window of the CPU. For more information, refer to the PLC manual issued by the manufacturer.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
DM (data memory)
R (input/output/internal auxiliary/special relay)
TC (timer/current value)
CC (counter/current value)
TS (timer/set value)
CS (counter/set value)
T (timer/contact)
C (counter/contact)
TM (temporary data memory)
CTH (high-speed counter/current value)
CTC (high-speed counter comparator/set value)
CT (high-speed counter comparator/contact)
CR (control relay)
CM (control memory)
Setting
100/10 Mbps Auto / 10 Mbps
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
8500
Device Memory
Set to "10 Mbps" (fixed) if the communication status is unstable.
TCP/IP
TYPE
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
(Underlined setting: default)
Remarks
Remarks