Communication Setting - Fuji Electric MONITOUCH X1 Series Hardware Specifications

5 Operation Method

5.4.10 Communication Setting

Pressing [Comm. Setting] in the menu icons brings up the Communication Setting screen.
This screen is used to view and configure communication parameters.
Menu icons
Indicates the maker,
model, and connection
port of PLCx.
Press to revert to the
settings set in the
screen program.
Item
PLC1 - PLC8 Maker
Communication Setting
Model
Target Port No.
<<
>>
Restore Screen Data Settings
* The model and connection port cannot be changed on the X1 series unit.
5-36
Communication Setting screen
Communication Setting screen
Indicates the maker of the connected device.
Indicates the model of the connected device.
Indicates the specified connection port.
Changes over the display of the communication settings between PLC1 to PLC8.
If only PLC1 is used, the display cannot be changed over.
Restores communication settings that were changed on the X1 series unit to those set in the screen
program.
For details, refer to page 5-37.
* When settings are restored, the changes made on the unit are cancelled.
For details on data changed in Local mode, refer to
Description
page 5-63.
Changes over the
display between
PLC1 to PLC8.
Press the [Apply]
switch to confirm
the settings.