Qnu Series Cpu; Qnh (Q) Series Link (Multi Cpu); Qnh (Q) Series (Multi Cpu) (Ethernet) - Fuji Electric Monitouch V9 Series Connection Manual

Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data register)
W (link register)
R (file register)
TN (timer/current value)
CN (counter/current value)
SPU (special unit buffer memory)
M (internal relay)
L (latch relay)
B (link relay)
X (input)
Y (output)
TS (timer/contact)
TC (timer/coil)
CS (counter/contact)
CC (counter/coil)
H (link unit buffer memory)
SD (special register)
SM (special relay)
SB (special link relay)
SW (special link register)
ZR (file register (for continuous access))
F (annunciator)
SS (totalizing timer/contact)
SC (totalizing timer/coil)
SN (totalizing timer/current value)
Z (index register)
*1 The unit number is required in addition to the device type and address. Convert byte address into word address when entering the data
on the editor if the memory device of the link unit is byte address.
For the unit number, set the decimal number of "XXX" included in the station I/O number "xxx0 H" of the link unit. For more information,
see page 9-16.
9.1.9

QnU Series CPU

The communication setting and available device memory are the same as those described in "9.1.7 QnH (Q) Series CPU".
9.1.10 Q00J/00/01 CPU
The communication setting and available device memory are the same as those described in "9.1.7 QnH (Q) Series CPU".

9.1.11 QnH (Q) Series Link (Multi CPU)

The communication setting and available device memory are the same as those described in "9.1.6 QnH (Q) Series Link".

9.1.12 QnH (Q) Series (Multi CPU) (Ethernet)

The communication setting and available device memory are the same as those described in "9.1.8 QnH (Q) Series (Ethernet)".
9.1.13 QnH (Q) Series CPU (Multi CPU)
The communication setting and available device memory are the same as those described in "9.1.7 QnH (Q) Series CPU".
Device Memory TYPE
00H
01H
02H
03H
04H
05H
Invalid on QnU series Built-in port
06H
07H
08H
09H
0AH
0BH Invalid on QnU series Built-in port
0CH Invalid on QnU series Built-in port
0DH Invalid on QnU series Built-in port
0EH Invalid on QnU series Built-in port
0FH Invalid on QnU series Built-in port
10H
11H
12H
13H
14H
15H
16H
17H
18H
19H
9.1 PLC Connection
Remarks
*1
9-21