Fuji Electric Monitouch V9 Series Connection Manual page 295

13-8 13. OMRON
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
DM (data memory)
CH (input/output/internal auxiliary relay)
HR (holding relay)
LR (link relay)
AR (auxiliary memory relay)
T (timer/current value)
C (counter/current value)
EMn (extended data memory)
TU (timer/contact)
CU (counter/contact)
*1 When using EMn (extended data memory), specify the bank number 0 to 7.
The assigned device memory is expressed as shown on the right when editing the
screen.
Indirect Device Memory Designation
 EMn (extended data memory)
Specify the bank number 0 to 7 in the expansion code.
Device Memory TYPE
00H
01H
02H
03H
04H
05H
06H
07H *1
09H Read only
0AH Read only
Example: EM0 : 30000
Remarks
Address
Colon
Bank number