Fuji Electric Monitouch V9 Series Connection Manual page 389

15-28 15. Panasonic
Wiring on the terminal block
If printing cannot be performed correctly, check the wiring status on the terminal block.
 Short-circuit A11 "LASER STOP-" and A12 "LASER STOP+". When they are opened, the auto shutter is closed and printing
is disabled.
 For B11 "EMER. -" and B12 "EMER. +", connect the normally-closed type emergency stop switch or short-circuit them.
When they are opened, the laser power is turned off and printing is disabled.
 Connect the power supply (internal or external) to A2 "IN COM." and B2 "OUT COM.". Otherwise, the laser marker will not
be activated.
When using an internal power supply, short-circuit A1 "+12V OUT" and A2 "IN COM." as well as B1 "0V OUT" and B2 "OUT
COM.".
When using an external power supply, remove short bars from between A1 "+12V OUT" and A2 "IN COM." as well as B1
"0V OUT" and B2 "OUT COM.".
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
FNM (file name)
FNO (file number change)
STR (text to print)
MCS (text to print (1-byte character))
LMT (limit date and time)
CNT (counter)
LTC (lot condition)
CDF (logo file)
ALC (global condition)
CDC (logo condition)
FST (file setting)
WDC (print line width correction)
WTC (print quality adjustment)
TRG (trigger condition)
DLY (delay)
YMD (year, month, day, time)
ERA (year of Japanese era)
ENV (input/output environment)
PST (print setting)
STS (status request)
RKC (rank condition)
RKS (rank text)
OFC (offset condition)
OFS (offset)
FNM (file name)
Address
0000
FNO (file number)
Address
0000
STR (text to print)
Address
0000 to 0029
0030 to 0059
:
1770 to 1799
Device Memory
File name
File number
Text to print in line number 01
Text to print in line number 02
:
Text to print in line number 60
TYPE
00H
01H
02H
03H
04H
05H Double-word
06H
07H
08H Double-word
09H Double-word
0AH Double-word
0BH
0CH
0DH
0EH
0FH
10H
11H
12H
13H Read only
14H
15H
16H
17H Double-word
Name
Name
Name
Remarks
Setting Range
File name (CHAR 20 bytes)
Setting Range
0 to 1023, 9999 *
* 9999: New
Setting Range
Text to print (CHAR 60 bytes)