Minas A4 Series - Fuji Electric Monitouch V9 Series Connection Manual

15-66 15. Panasonic

15.2.3 MINAS A4 Series

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Servo Amplifier
Communication parameters can be set by operating the rotary switch and the keys on the front panel. For more information,
refer to the servo amplifier manual.
Setting changes will take effect after turning the power off and back on. If changes are made to any settings, turn the power
off and on again.
Rotary switch (ID)
ID
0
Parameters
Mode
0C
0D
Data length: 8, stop bit: 1, parity: none (fixed)
Setting
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 bps
8 bits
1 bit
None
0 to 15
Item
Axis number setting
Item
RS-232C communication
baud rate setting
RS-485 communication baud
rate setting
RS-232C connection: 0 to F
RS-485 connection: 1 to F
1: 4800 bps
2: 9600 bps
3: 19200 bps
4: 38400 bps
5: 57600 bps
1: 4800 bps
2: 9600 bps
3: 19200 bps
4: 38400 bps
5: 57600 bps
(Underlined setting: default)
Remarks
Setting
(Underlined setting: default)
Setting