Fuji Electric Monitouch V9 Series Connection Manual page 335

13-48 13. OMRON
13.2.11 E5ZN
Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Temperature Controller
UNIT
BPS
Communication level
Adjustment level
*1 When writing the setting data from the V9, set "ON" for the "communication writing" setting.
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
C0 Setting area 0
C1 Setting area 0
C3 Setting area 1
Indirect Device Memory Designation
15
n + 0 Model (91 to 98)
n + 1
n + 2 Expansion code
n + 3
For bit designation, an expansion code setting is required.
00H: when designating bit 0 to 15
01H: when designating bit 16 to 31
Item
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
Item
4
LEn
Sbit
Prty
CMWT
Device Memory
8 7
Device type
Address No.
Bit designation
00 Station number
Setting
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
0 to 15
Setting Data
Unit No.
Baud rate
Data length
Stop bit
Parity
Communication writing
TYPE
00H Double-word, read only
01H Double-word
02H Double-word
0
(Underlined setting: default)
Remarks
(Underlined setting: default)
Setting
0 to F (= 0 to 15)
0: 4800
1: 9600
2: 19200
3: 38400
7 / 8 bits
1 / 2 bits
None / Even / Odd
*1
OFF / ON
Remarks