Fuji Electric Monitouch V9 Series Connection Manual page 234

PLC
FX3U-ENET-L
Make PLC settings using the configuration tool "FX3U-ENET-L".
Ethernet operational settings
Item
Communication data code
Initial timing
IP address (DEC)
Ethernet open settings
Use row No. 3 or No. 4 for setting.
Item
Protocol
Open system
Existence confirmation
Host station Port No. (DEC)
Transmission target device IP
address
Transmission target device Port
No. (DEC)
FX3U-ENET
Make the PLC setting using the programming tool "FX-Configurator-EN". For more information, refer to the PLC manual
issued by the manufacturer.
Ethernet operational settings
Communication data code
Initial timing
IP address (DEC)
Binary code
Always wait for OPEN (Communication possible
at STOP time)
Specify according to the environment.
UDP
MC protocol
No confirm
As desired
IP address of the V9
Port number of the V9
Item
Binary code
Always wait for OPEN
(Communication possible at STOP time)
Make settings in accordance with the
network environment.
Setting
Setting
1025 to 5548, 5552 to 65534
Setting
9.1 PLC Connection
Remarks
Remarks
Remarks
9-41