Fuji Electric Monitouch V9 Series Connection Manual page 4

In this manual, you will find various notes categorized under the following two levels with the signal words "Danger" and "Caution."
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and
CAUTION
could cause property damage.
Note that there is a possibility that an item listed under
 Never use the output signal of the V9 series for operations that may threaten human life or damage the system, such as signals
used in case of emergency. Please design the system so that it can cope with the malfunctions of a touch switch. A malfunction of a
touch switch may result in machine accident or damage.
 Turn off the power supply when you set up the unit, connect new cables, or perform maintenance or inspections. Otherwise,
electrical shock or damage may occur.
 Never touch any terminals while the power is on. Otherwise, electric shock may occur.
 Put a cover on the terminals on the unit before turning the power on starting operation. Otherwise, electric shock may occur.
 The liquid crystal in the LCD panel is a hazardous substance. If the LCD panel is damaged, do not ingest the leaked liquid crystal. If
the liquid crystal contacts skin or clothing, use soap and wash off thoroughly.
 Never disassemble, recharge, deform by pressure, short-circuit, reverse the polarity of the lithium battery, nor dispose of the lithium
battery in fire. Failure to follow these conditions will lead to explosion or fire.
 Never use a lithium battery that is deformed, leaks, or shows any other signs of abnormality. Failure to follow these conditions may
lead to explosion or fire.
 The power lamp flashes when the backlight is at the end of life or is faulty. However, the switches on the screen are operable at this
time. Do not touch the screen when the screen becomes dark and the power lamp flashes. Otherwise, a malfunction may occur and
result in machine accident or damage.
 Check the appearance of MONITOUCH when unpacked. Do not use it if any damage or deformation is found. Failure to do so may
lead to fire, damage or malfunction.
 For use in a facility or for a system related to nuclear energy, aerospace, medical, traffic equipment, or mobile installations, please
consult your local distributor.
 Operate (or store) the V9 series under the conditions indicated in this manual and related manuals. Failure to do so could cause fire,
malfunction, physical damage or deterioration.
 Understand the following environmental limits for use and storage of MONITOUCH. Otherwise, fire or damage to the unit may
result.
- Avoid locations where there is a possibility that water, corrosive gas, flammable gas, solvents, grinding fluids or cutting oil can
come into contact with the unit.
- Avoid high temperature, condensation, and outside weather conditions, such as wind, rain or direct sunlight.
- Avoid locations where excessive dust, salt, and metallic particles are present.
- Avoid installing the unit in a location where vibration or physical shock may be transmitted.
 Equipment must be correctly mounted so that the main terminal of the V9 series will not be touched inadvertently. Otherwise, an
accident or electric shock may occur.
 Tighten the fixtures of the V9 series evenly to a torque of 0.6 N·m.
Excessive tightening may distort the panel surface. Loose tightening may cause MONITOUCH to come off, malfunction or be
short-circuited.
 Check periodically that terminal screws on the power supply terminal block and fixtures are firmly tightened. Loosened screws may
result in fire or malfunction.
 Tighten terminal screws on the power supply terminal block equally to a torque of 7.1 to 8.8 inch-lbf (0.8 to 1.0 N·m). Improper
tightening of screws may result in fire, malfunction, or other trouble.
 The V9 series has a glass screen. Do not drop or give physical shock to the unit. Otherwise, the screen may be damaged.
 Connect the cables correctly to the terminals of the V9 series in accordance with the specified voltage and wattage. Over-voltage,
over-wattage, or incorrect cable connection could cause fire, malfunction or damage to the unit.
 Be sure to establish a ground of the V9 series. The FG terminal must be used exclusively for the unit with the level of grounding
resistance less than 100 . Otherwise, electric shock or fire may occur.
 Prevent any conductive particles from entering into the V9 series. Failure to do so may lead to fire, damage, or malfunction.
 After wiring is finished, remove the paper used as a dust cover before starting to operate the V9 series. Operation with the cover
attached may result in an accident, fire, malfunction, or trouble.
 Do not attempt to repair the V9 series at your site. Ask Hakko Electronics or the designated contractor for repairs.
Notes on Safe Usage of MONITOUCH
may have serious ramifications.
CAUTION
DANGER
CAUTION