Fuji Electric Monitouch V9 Series Connection Manual page 95

RCB-TU-SIO-A/B
PORT switch (PORT)
Emergency stop terminal block
When the servo cannot be turned on, connect the EMG switch between the EMG1 terminal and the EMG2 terminal on the
emergency stop terminal block.
When the EMG switch is not used, short-circuit them.
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Coil
Register
PORT
ON
ON
SW1
Device Memory
(coil)
(holding register)
2.1 Temperature Controller/Servo/Inverter Connection
Setting
TYPE
00H
02H
2-19
Remarks
Remarks