Fx1S Series Cpu - Fuji Electric Monitouch V9 Series Connection Manual

9-36 9. MITSUBISHI ELECTRIC

9.1.21 FX1S Series CPU

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
No particular setting is necessary on the PLC.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data register)
TN (timer/current value)
CN (counter/current value)
32CN (32-bit counter/current value)
M (auxiliary relay)
S (state)
X (input relay)
Y (output relay)
TS (timer/contact)
CS (counter/contact)
DX (file register)
*1 For items where double-words can be used (Num. Display, Graph, Sampling), data is processed as double-words.
For those where bits or words can be used, data is processed as words consisting of lower 16 bits.
For input:
For output:
Setting
1 : 1 / Multi-link2 /
Multi-link2 (Ethernet)
RS-422/485
9600 bps
0 to 31
Device Memory
Upper 16 bits are ignored.
"0" is written for upper 16 bits.
7 bits
1 bit
Even
TYPE
00H D0 to 255, D8000 or later (special register)
01H
02H
*1
03H
Double word
04H M0 to 511, M8000 or later (special relay)
05H
06H Read only
07H
08H
09H
0AH Use DX for D1000 to 2999.
(Underlined setting: default)
Remarks
Remarks