Fuji Electric Monitouch V9 Series Connection Manual page 241

9-48 9. MITSUBISHI ELECTRIC
Specifying the access CPU
In addition to the device type and address, an access CPU must be specified. The assigned device memory is expressed as
shown below when editing the screen.
Example: 1 : D00000
* Q170MCPU is equipped with the sequencer CPU and motion CPU in one unit.
The multi CPU unit No. is fixed as shown below:
Management CPU: Sequencer CPU
Multi CPU 1:
Multi CPU 2:
Indirect Device Memory Designation
 For the address number of 0 to 65535:
15
n + 0
n + 1
n + 2
Expansion code
n + 3
* For the SPU device memory, specify the unit number in the expansion code.
For any other devices memory, specify the access CPU number in the expansion code.
Management CPU: 0
Address number
Device type
Access CPU No. 0: Management CPU
No. 1: Multi CPU 1
No. 2: Multi CPU 2
Sequencer CPU
Motion CPU
8 7
Model Device type
Address No.
* Bit designation
00 Station number
Multi CPU: 1 or 2
 For the address number of 65536 or greater:
0 15
n + 0 Model
n + 1
n + 2
n + 3
Expansion code
n + 4
8 7
Device type
Lower address No.
Higher address No.
*
Bit designation
00 Station number
0