Fuji Electric Monitouch V9 Series Connection Manual page 183

Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
P (input/output relay)
M (auxiliary relay)
L (link relay)
K (keep relay)
F (special relay)
T (timer/current value)
C (counter/current value)
D (data register)
TC (timer/contact)
CC (counter/contact)
N (communication data register)
R (file register)
ZR (file register)
U (analog data register)
*1 The assigned device memory is expressed as shown on the
right when editing the screen.
Indirect Device Memory Designation
15
n+0 Model
n+1
n+2 Expansion code
n+3
Example: Indirect device memory designation of "UW1F.31"
UW1F.31
B (Special module No.)
A (Base No. + Slot No.)
Address number = A converted to decimal  32 + B = 1F (HEX) 31 (DEC)  32 + 31 = 1023
Specify "1023" (DEC) for the address number.
Device Memory
8 7
Device type
Address No.
Bit designation
00 Station number
TYPE
00H PW as word device, input relay: read only
01H MW as word device
02H LW as word device
03H KW as word device
04H FW as word device; FW0 to FW1023: read only
05H
06H
07H
09H
0AH
0BH
0CH RW as word device
0DH
*1
0EH
UW as word device
Example: U 3 1 . 31 . F
0
8.1 PLC Connection
Remarks
Bit address: 0 to F (hexadecimal)
Period
Special module No.: 0 to 31 (decimal)
Period
Slot No.: 0 to F (hexadecimal)
Base No.: 0 to 7 (decimal)
8-11