Blower Unit Removal - Mazda 323 1988 Workshop Manual

15
HEATER
Connecting rod
3. Pull connecting rod lever upward to its extreme
stop, then install connecting rod to fastener.
4. Use clip to secure rod.
5. Assure proper operation of temperature control.
REC-FRESH Air Selector Wire
1. Set selector lever at fresh air intake position.
2. Push lever forward to its extreme stop, then fix wire
loop to lever.
3. Assure proper operation of REC-FRESH Air Selec-
tor Control.
BLOWER UNIT REMOVAL
Blower unit can be removed as per following proce-
dures without removal of the instrument panel.
1. Remove under cover of instrument panel located
in passenger side.
2. Remove glove box.
3. Remove stay of steel plate (black) provided in up-
per part of glove box.
4. Remove duct in between blower unit and heater
unit.
-"
5. Unfasten 3 mounting nuts of blower unit.
6. Remove FRESH-REC air selector wire and harness
connector.
7. Remove blower unit.
Caution
l
For vehicle models with Air-conditioner, re-
move instrument panel bracket for ease of
blower unit removal.