Mazda 323 1988 Workshop Manual page 1008

HEATER 15
HEATER CONTROL SWITCH
ADJUSTMENTS
Mode Control Wire
1, Set mode control knob to DEF position.
2. Pull wire lever downward to its extreme stop, then
install loop of wire onto lever.
3. Pull connecting rod downward to its extreme stop,
then install connecting rod to fastener.
4. Use clip to clamp rod in position.
5. Set fan speed at "4" to insure proper air circulation.
Air-Mix Door Control Wir6
1. Set TEMP lever at MAX-COLD position.
2. Pull wire lever downward to its extreme stop, then
fix Air-Mix wire loop onto lever.
15-113