Mazda 323 1988 Workshop Manual page 998

CENTER DIFFERENTIAL LOCK SYSTEM 1'5
2. Connect the lock motor connector to the body har-
ness and change in FREE position switching the
control switch.
Note
Confirm that the motor rotates when switch-
ing the control switch.
3. Confirm that the flat edge of the rack locates on
the top face.
4. Install the lock motor after applying genuine gear
oil to the 0 ring.
5. Tighten the lock bolts.
6. Turn rack to the left using standard screw driver.
7. Install the pad to the motor side.
8. Install the lock bolt.
Note
When the lock bolt can not be installed, ad-
just the rack position with rotation.
9. Connect the lock motor connector and bleeder
hose.
10. Connect the negative battery cable.
15-103