Do Not Disturb; Ring Once Feature; Send A Call To Voicemail; Check Voicemails - Talkswitch TS-600 User Manual

DO NOT DISTURB

You can enable Do Not Disturb on your extension and you will not receive any
calls at that extension. All calls will follow the Do Not Disturb call cascade
option for your extension, such as going directly to voicemail.
To enable/disable Do Not Disturb:
1. Lift the handset or press the
DO NOT DISTURB
2. Press the
ENABLE
3. Press the
4. The Do Not Disturb setting of your extension will be changed. You will
receive a system confirmation of Do Not Disturb "ON"or Do Not Disturb "OFF"

RING ONCE FEATURE

The TS-600 has a useful feature for minimizing ringing noise in an office environ-
ment. The phone can be set to ring only one time. Subsequent rings will be
muted and the in-use light will flash during each ring.
To enable this feature, simply press the
on-hook.

SEND A CALL TO VOICEMAIL

While on a call, you may wish to send the caller to a voicemail box in order for
that caller to leave a message for someone else.
While on a call:
SEND TO VMAIL
1. Press the
2. Enter the desired voicemail box number and press
3. Hang up the call and the caller will now be able to leave a message.

CHECK VOICEMAILS

The TS-600 will indicate that you have new voice
messages in your voice in-box by flashing the
message waiting lamp.
The TS-600 will also display the number of new
voice messages you have.
W W W.T A L K S W I T C H . CO M
SPEAKER
softkey.
DISABLE
/ softkey.
softkey.
T S - 6 0 0 U S E R G U I D E
/ button (optional).
MUT E
button while the phone is
OK
12/09
Pick Up
Un-park
Un-hold
softkey
03:00 PM
New Voice Message 03
Do not Disturb
Voicemail
Paging
1 5