Configuring The Analog Local Extension Handset; Configuring The Ts-850I/Ts-860I As A Standalone Ip Phone - Talkswitch TS-860i User Manual

6. Set the Extension type to Regular phone or fax.
7. In a multi-unit system, select the TalkSwitch unit the extension will be
associated with. This unit will hold the voicemail for the extension. Click
Next.
8. Enter the user's First name and Last name. The names are used for caller ID
and the dial-by-name directory.
9. Assign an Extension number.
10. If necessary, select TalkSwitch as the Manufacturer, and then select the model.
11. Click Finish.
12. After configuring the extensions, choose File > Save. The TalkSwitch system
will automatically configure each handset.

Configuring the analog local extension handset

1. In Idle mode, press the OK key on the handset to access the Main menu.
2. Choose Settings, and then press the OK key.
3. Choose Telephony Settings, and then press the OK key.
4. Choose Primary line, and then press the OK key.
5. Choose Landline, and then press the OK key.

Configuring the TS-850i/TS-860i as a standalone IP phone

Once you have completed the procedures in Installing the TS-850i/TS-860i on page
7, you can configure the TS-850i/TS-860i as a standalone IP phone without using
the TalkSwitch management software. If necessary, you will configure a static IP
address for the base. You will then configure the voice settings.
NOTE: A standalone IP phone does not provide any TalkSwitch features.
E V E R Y C A L L C O U N T S 5 1