Voicemail; Updating The Firmware; Checking For Updates - Talkswitch TS-350i User Manual

Conference call
Press the More softkey then press the Conf. softkey to put the first party on hold. Call the second party
(for external calls, first access an outside line). Press the Join softkey to connect to all parties.
Park a caller
Press the programmed Park key. Otherwise, press the
with a parking orbit.
Retrieve a parked caller
At the dial tone, press the programmed UnPark key, then dial orbit + #. Otherwise, dial ** + orbit + #.
Two-way intercom/group paging to TalkSwitch phones
Press the programmed Intercom or Group Page key + extension + Dial softkey. Otherwise dial *84
(Intercom) + *85 (Paging) + extension + #.
PA overhead paging
Press the programmed Overhead Paging key, or dial *0 + #.
Attach account code to last call
At dial tone, dial *88 + #. When prompted, enter <Account code> + #.
CDR logging must be active.

VOICEMAIL

Access Mailbox — Locally
Access Mailbox — Remotely
Change greeting options
Change personal options (password, date stamp, remote notification options)
MESSAGE PLAYBACK CONTROLS
Rewind 10 seconds
Go to beginning
Skip ahead 10 seconds
Skip to end of message
Check time and date stamp
Forward message
Delete message
Save message
Skip to next message

UPDATING THE FIRMWARE

Updating the firmware on the phone can be done two different ways — direct via the Internet or using
the IP Phone Update Utility.

Checking for Updates

From the phone,
• Press the button.
• Press 8 to enter the Information menu.
• Press the Up softkey.
• Take note of the F/W version.
• Go to http://www.talkswitch.com/support to check for the latest updates.
6 6
button + *510 + #. The system will respond
Press the Vmail softkey.
Press ** + <mailbox number>
T S - 3 5 0 i U S E R G U I D E
Dial 2
Dial 3
Dial 1
Dial 1 1
Dial 3
Dial 3 3
Dial 5
Dial 6
Dial 7
Dial 9
Dial #