Updating the Firmware
Updating the firmware on the phone can be done two different ways — direct via the
Internet or using the TalkSwitch IP Phone Update Utility.
Checking for Updates
From the phone,
•
Press the
•
Press 8 to enter the Information menu.
•
Press the Up softkey.
•
Take note of the F/W version.
•
Go to http://www.talkswitch.com/support to check for the latest updates.
Internet Update
•
Press the
•
Press 3 to enter the Phone Settings menu.
•
Press 7 to enter the S/W Update menu.
•
Press 2 to access the TFTP Server Address.
•
Write down the IP address shown on the screen. This will be required once the update
is complete.
•
Clear the current entry and enter tsphones.talkswitch.com. Once changed, the phone
will request a reboot. Select Yes.
After the Update
•
Press the
•
Press 3 to enter the Phone Settings menu.
•
Press 7 to enter the S/W Update menu.
•
Press 2 to access the TFTP Server Address.
•
Enter the IP address that was previously entered to point the phone back to your
TalkSwitch phone system. Once changed, the phone will request a reboot. Select Yes.
Using the TalkSwitch IP Phone Update Utility
If you are on a closed network (no Internet access), or are having problems with updating
over the Internet, you can download the IP Phone Update Utility from http://
www.talkswitch.com/support.
•
After installing the application, run it.
•
Follow the directions in the update utility for performing the update.
E V E R Y C A L L C O U N T S
button.
button.
button.
2 1