7.
8. Enter the mandatory last name and first name of the person to whom the card is assigned.
9. Enter a Card Password.
10. Re-enter the password for verification.
11. Record and store the password in a secure location.
12. Click Write Card.
13. Repeat
14. After the last card is written, click OK in the Master Key Backup dialog box to finish the
Restoring a master key from a file
Use the following procedure to restore the master key from a file.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Restore Master Key as the Master Key Action.
FIGURE 253
Brocade Network Advisor SAN User Manual
53-1002167-01
Run the additional cards through the reader that are needed for the set. As you read each card,
the card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
The dialog box prompts you to insert the next card, up to the number of cards specified in
step
5.
step 6
through
step 12
operation.
The Encryption Center dialog box displays
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Restore Master Key for Encryption Group dialog box displays
Select a Master Key to Restore (from file) dialog box
for each card in the set.
(Figure
153).
18
Master keys
(Figure
253).
545