Deleting A Logical Switch - Brocade Communications Systems Brocade 8/12c User Manual

17
Configuring Virtual Fabrics
8. Click OK on the Logical Switches dialog box.
9. (Optional) Select the Unbind Port Addresses while moving them check box.
10. Click Start to send these changes to the affected chassis.
11. When the changes are complete, click Close.

Deleting a logical switch

1. Select a switch on the Product List or Connectivity Map and select Configure > Virtual Fabric >
2. Right-click anywhere in the Existing Logical Switches table and select Table > Expand All.
3. Select the logical switch you want to delete from the Existing Logical Switches table and click
4. Read the confirmation message and click Yes.
5. Click OK on the Logical Switches dialog box.
6. (Optional) Select the Unbind Port Addresses while moving them check box.
7.
8. When the changes are complete, click Close.
422
The Logical Switch Change Confirmation and Status dialog box displays with a list of all
changes you made in the Logical Switches dialog box.
The Re-Enable ports after moving them and QoS disable the ports while moving them check
boxes are selected by default.
NOTE
Ports are disabled before moving from one logical switch to another.
NOTE
Most changes to logical switches will disrupt data traffic in the fabric.
The status of each change is displayed in the Status column and Status area in the dialog box.
Logical Switches.
The Logical Switches dialog box displays.
Delete.
All ports in the deleted logical switch are reassigned to the default logical switch.
The Logical Switch Change Confirmation and Status dialog box displays with a list of all
changes you made in the Logical Switches dialog box.
The Re-Enable ports after moving them and QoS disable the ports while moving them check
boxes are selected by default.
NOTE
Ports are disabled before moving from one logical switch to another.
Click Start to send these changes to the affected chassis.
NOTE
Most changes to logical switches will disrupt data traffic in the fabric.
The status of each change is displayed in the Status column and Status area in the dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01