6. Click OK.
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
9. Click Close to close the Deployment Status dialog box.
Editing a DCB port
1. Select Configure > DCB from the menu bar.
2. Select a DCB port from the Products/Ports table.
3. Click Edit.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Deploy to Products dialog box displays.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The Edit Port dialog box displays.
FIGURE 122
Edit Port dialog box
14
Switch policies
347