Port Auto Disable - Brocade Communications Systems Brocade 8/12c User Manual

10

Port Auto Disable

3. Sort the results by clicking on the column header.
4. Rearrange the columns by dragging and dropping the column header.
5. Click Close to close the Port Optics (SFP) dialog box.
Refreshing port optics
To refresh port optics, click Refresh.
The Management application retrieves updated port optic information.
Port Auto Disable
The Port Auto Disable dialog box allows you to enable and disable the port auto disable flag on
individual FC_ports or on all ports on a selected device, as well as unblock currently blocked ports.
Enabling the port auto disable on a port or device configures a port to become blocked when any of
the following five events occur:
•
•
•
•
•
NOTE
To enable or disable the port auto disable flag, the device must be running Fabric OS 6.3 or later.
You can also configure ports to become blocked when one or more of the events listed above occur.
NOTE
To configure the specific events that trigger the port auto disable flag, the device must be running
Fabric OS 7.0 or later.
286
Loss Of Sync
Loss OF Signal
OLS (Offline Primitive Sequence)
NOS (Not Operational Primitive Sequence)
LIP (Loop Initialization Primitive Sequence)
Brocade Network Advisor SAN User Manual
53-1002167-01