Editing Host Adapter Credentials; Removing A Host From Active Discovery - Brocade Communications Systems Brocade 8/12c User Manual

3
Host discovery
8. Click OK on the Add Host Adapters dialog box.
9. Click Close on the Discover Host Adapters dialog box.

Editing Host adapter credentials

To edit Host credentials, complete the following steps.
1. Select Discover > Host Adapters.
2. Select the Host in the Discovered Hosts list and click Edit.
3. Enter the HCM Agent port number in the Port field if necessary.
4. Enter your username in the User ID field.
5. Enter your password Password field.
6. Click OK on the Edit Host Adapters dialog box.
7.

Removing a host from active discovery

If you decide you no longer want the Management application to discover and monitor a specific
host, you can delete it from active discovery. Deleting a host also deletes the host data on the
server (both system collected and user-defined data) except for user-assigned names for the device
port, device node, and device enclosure information.
72
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
The Discover Host Adapters dialog box displays.
The Edit Host Adapters dialog box displays.
FIGURE 30
Edit Host Discovery dialog box
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
Click Close on the Discover Host Adapters dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01