FIGURE 9
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
Deregistering an authentication card
Authentication cards can be removed from the database and the switch by deregistering them. Use
the following procedure to deregister an authentication card.
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption group from the Encryption Center Devices table, then select Group >
3. Select the authentication card in the Registered Authentication Cards table.
4. Click Deregister.
5. A confirmation dialog box displays. Click Yes to confirm deregistration.
6. Click OK.
Fabric OS Encryption Administrator's Guide
53-1002159-03
Authentication Cards dialog box - registering smart cards from archive
The card is added to the Registered Authentication Cards table in the Encryption Group
Properties dialog box.
The Encryption Center dialog box displays.
Security from the menu task bar, or right-click an encryption group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The registered authentication card is removed from the table.
The card is deregistered from the group.
2
Smart card usage
19