Deleting An Allow / Prohibit Matrix Configuration; Cup Logical Path Configuration; Viewing Cup Logical Path Configurations; Configuring Cup Logical Paths - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

16

CUP logical path configuration

3. Click Copy.
4. In the dialog box, enter a name and description for the new configuration and click OK to save

Deleting an Allow / Prohibit Matrix configuration

To delete a saved Allow / Prohibit Matrix configuration.
1. Display the Allow / Prohibit Matrix configuration list.
2. Select the saved configuration from the list.
3. Click Delete.
4. Click Yes to delete the selected configuration; click No to cancel the deletion.

CUP logical path configuration

The logical reporting path is a CUP mechanism for sending FRU-failure type reports to a FICON
Logical Path via the FICON Protocol.

Viewing CUP logical path configurations

To display a list of CUP logical path configurations, perform the following steps.
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Configure > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
5. Click the CUP Logical Paths subtab.

Configuring CUP logical paths

To configure a CUP logical path, perform the following steps.
1. Select a FICON-enabled switch from the Fabric Tree.
2. Select Configure > Switch Admin.
3. Click Show Advanced Mode to see all the available tabs and options.
4. Select the FICON CUP tab.
210
The Allow / Prohibit Matrix Configuration dialog box displays.
the configuration to the target file; click Cancel to cancel copying the configuration.
The file name must be in alphanumeric characters and can contain only dashes or
underscores as special characters.
The Delete Allow / Prohibit Matrix Configuration confirmation dialog box displays.
The FICON CUP page displays the FICON Management Server page in front. All attributes on
this page are read-only until FMS mode is enabled.
Web Tools Administrator's Guide
53-1002756-01