Host Fault Management; Adapter Events; Event Policies - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

TABLE 22
FC port measures
Instructions for generating real-time performance data are detailed in
performance

Host fault management

Fault management enables you to monitor your SAN using the following methods:
•
•
•
•

Adapter events

You can configure triggers and actions for the following event types that are:
•
•
•
You can configure event policies for events you want to monitor. A policy is the mechanism defined
by you that identifies the response to specific event types. You can customize the event
management policy using triggers and actions, which are explained in
Management".

Event policies

You can create policies for events you want to monitor. A policy is the mechanism defined by you
that identifies the response to specific event types. You can customize the event management
policy using triggers and actions, which are explained
also provides information about the following topics:
DCFM Professional Plus User Manual
53-1001774-01
Counters (Continued)
graph".
Monitor logs for specified conditions and notify you or run a script when the specified condition
is met.
Create event-based policies, which contain an event trigger and action.
Configure E-mail event notification.
Receive and forward Syslog messages from Fabric OS switches and Brocade HBAs, managed
using the Host Connectivity Manager (HCM).
Product Audit Event — occurs when a target product is audited.
Product Status Event — occurs when a device or connection changes to Up or Down.
Product Threshold Alert Event — notifies you when a threshold alert has been reached.
HBA port measures
"Event policies"
CNA port measures
Received length error frames
Received code error frames
"Generating a real-time
Chapter 10, "Fault
on page 255. This section
14
343