Deleting A Port Mirror Connection; Displaying Port Mirror Connections - Brocade Communications Systems StoreFabric SN6500B Troubleshooting Manual

The configuration database keeps information about the number of port mirror connections
configured on a switch, the number of chunks of port mirroring data that are stored, and the chunk
number. When removing a mirror connection, always use this method to ensure that the data is
cleared. Deleting a connection removes the information from the database.

Deleting a port mirror connection

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the portMirror

Displaying port mirror connections

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the portMirror
Fabric OS Troubleshooting and Diagnostics Guide
53-1002751-01
Port mirroring
del SourceID DestID command.
--
For example, to delete the port mirror connection on mirror port 2, you might type:
switch:admin> portMirror --del 0x011400 0x240400
show command.
--
You should see output similar to the following:
switch:admin> portmirror --show
Number of mirror connection(s) configured: 4
Mirror_Port SID
----------------------------------------
18 0x070400
18 0x070400
18 0x070400
18 0x070400
DID State
0x0718e2 Enabled
0x0718e3 Enabled
0x0718ef Enabled
0x0718e0 Enabled
3
43