Chapter 3
3.1.1.3
Removing the
Upper Cover
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
[2]
F-3-4
2) Disconnect the 2 connectors [1] and then
remove the harness from the upper cover
[2].
F-3-5
3-2
0008-0710
[1]
3) Remove the 3 screws [1] and detach the
upper cover [2].
F-3-6
3.1.2 Left Cover
3.1.2.1
Removing the
Left Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[1]
0008-0729