Clean The Original Scanning Area Prompt; Storing Paper Sizes For The Paper Deck-Aa1 - Canon imagePRESS C1+ Reference Manual

Clean the Original Scanning Area Prompt

You can use the Cleaning Display for the Original Scanning Area mode to prompt you to clean
the scanning area when the machine detects streaks or stains. If the feeder is not clean, the
machine will scan and print dust and grime on the output. The Clean the Original Scanning
Area Prompt appears when originals are placed in the feeder. For instructions on cleaning the
feeder's scanning area "Platen Glass and Original Feeding Belt/Underside of the Feeder," on p.
7-53.
IMPORTANT
This mode is available only if the optional Feeder (DADF-R1) is attached.
1
4
2

Storing Paper Sizes for the Paper Deck-AA1

You can store the paper sizes that you most frequently load into the optional Paper Deck-AA1.
IMPORTANT
This mode is available only if the optional Paper Deck-AA1 is attached.
NOTE
If [Register Sizes for Side Paper Deck] is not displayed, contact your local authorized Canon dealer.
1
2
4-58
Specifying Common Settings
➞ [Common Settings] ➞ [Cleaning Display for the Original
Press
Scanning Area].
Select [On] or [Off] ➞ press [OK].
➞ [Common Settings] ➞ [Register Sizes for Side Paper Deck].
Press
Select the desired paper size ➞ press [OK].
The selected mode is set.
IMPORTANT
Make sure to load the same paper size that you stored in step 3 into the optional Paper
Deck-AA1. (See "Changing the Paper Size for the Paper Deck-AA1," on p. 7-21.)