Left Deck Pickup Assembly - Canon iR7086 Series Service Manual

Hide thumbs Also See for iR7086 Series:
Table of Contents

Advertisement

[4]
[5]

8.11.4 Left Deck Pickup Assembly

8.11.4.1 Removing the Left Deck Pickup Assembly
iR7105 / iR7095 / iR7086
1) Slide out the left deck.
2) Remove the two screws [1] found on the left and right sides of the left
deck[2]; then, detach the left deck[2].
[1]
3) Open the front cover.
4) Disconnect the connector [1] from inside the machine, and remove the
locking support [2].
[1]
5) Remove the two screws [1], and detach the two pickup fixing plates [2];
then, detach the left deck pickup assembly [3].
Keep supporting the pickup assembly; otherwise, the pickup assembly could
drop when the fixing plate is removed.
[4]
[2]
[3]
[1]
F-8-60
[2]
[1]
F-8-61
[2]
F-8-62
8.11.5 Left Deck Pickup Sensor
8.11.5.1 Removing the Left Deck Pickup Sensor
iR7105 / iR7095 / iR7086
1) Remove the front deck (left) pickup assembly.
2) Remove the screw [1], and detach the pickup sensor unit [2].
0011-8491
3) Disconnect the connector [1], and detach the left deck pickup sensor [2].
When removing the scanner sensor, be sure to remove the paint used to lock
the claw in place in advance to prevent breaking the claw. When mounting
it, be sure the claw is not displaced or the sensor is not disoriented.
8.11.6 Right Deck Pickup Sensor
8.11.6.1 Removing the Right Deck Feed Sensor/Right
Deck Pickup Sensor
iR7105 / iR7095 / iR7086
1) Remove the front deck (right) pickup assembly.
2) Remove the guide plate [1].
[3]
[2] [1]
[1]
[1]
F-8-63
[1]
[2]
F-8-64
[1]
[2]
F-8-65
Chapter 8
0010-8963
0010-8987
8-37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir7105 seriesIr7095 series7095 series7086 series

Table of Contents