Removing The Front Deck (Lifter) Draw-Out Sensor; Removing The Horizontal Registration Sensor - Canon ImageRunner iR8500 Series Service Manual

Chapter 9
[1]
[2]
[1]
2) Disconnect the connector [3]; then, remove the screw [4], and detach
the postconfluence sensor [5].
[5]
[4]
9.10.20.14 Removing the Front Deck (lifter) Draw-Out
Sensor
iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Disconnect the connector [1] from the bottom of the duplexing unit;
then, remove the screw [2], and detach the front deck (left) feed
sensor [3].
9-76
F-9-188
[3]
F-9-189
0007-1456

9.10.20.15 Removing the Horizontal Registration Sensor

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Remove the duplexing unit from the main body.
2) Remove the front cover.
3) Disconnect the connector [1], and remove the three screws [2].
4) Remove the screw [3], and detach the duplexing unit right fixing
assembly [4]; then, remove the two screws [5] at the rear, and detach
the right grip plate [6].
[6]
[5]
[4]
When mounting the right grip plate, be sure that the boss on the grip
plate is in the hole of the side plate.
5) Remove the screw [7], and detach the horizontal registration sensor
[8].
[1]
[2]
[3]
F-9-190
0007-1458
[2]
[1] [2]
F-9-191
[3]
F-9-192