Pickup Vertical Path Roller - Canon imagerunner C5180 Service Manual

10.10.27.2 Removing the Fixing/Feeder
Unit
1) Remove the fixing/feeder unit [2].
- 2 stoppers [1]
[2]
F-10-137

10.10.28 Pickup Vertical Path Roller

10.10.28.1 Preparation for Removing the
Vertical Path Roller
1) Remove the cassette.
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
1-1) Slide out the cassette.
2) Remove the front right cover. (page 12-
22)Reference[Removing the Right Front Cover]
3) Remove the rear right cover. (page 12-
22)Reference[Removing of the Right Rear
Cover]
4) Remove the pickup vertical path cover [3].
- 1 screw [2] (remove the pickup vertical path
lower cover [1])
[1]
5) Remove
36)Reference[Removing the Pickup Unit]
6) Remove the pick-up system sensor mounting
plate.
6-1) Remove the bracket [2].
- 3 screws [1] at the rear
6-2) Remove the sensor mounting plate [5].
- connector [1]
- screw [2]
- cassette pickup solenoid [3]
- 5 screws [4]
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
Chapter 10
F-10-138
the pickup unit.
[1]
[1]
F-10-139
(page 10-
[2]
10-63