Removing The Vertical Path Roller - Canon iR4570 Series Service Manual

Chapter 8
8.8.21.8 Removing the Vertical
Path Roller
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Free the claw [A] of the gear [1] at the rear; then,
detach the gear and the bushing [2].
F-8-371
2) Free the claw [A] of the bushing [1] at the front;
then, shift it to the rear, and lift the vertical path
roller [2] to detach.
F-8-372
8.8.22 Duplex Feed Roller 2
8.8.22.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
8-138
1) Open the pedestal right door [1]. (if equipped with
0007-6743
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
8.8.22.2 Removing the Right
Door
iR3570 / iR4570 / iR3530
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate
[2].
0007-6744
[4]
[2]
[1]
F-8-373
F-8-374
[3]
[3]
[3]
0007-6746