32
:WMEMory<r> Commands
:WMEMory<r>:YSCale
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1-2 in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per
division, of the selected reference waveform.
Legal values for the scale are copied from the original source waveform
(that is, the analog channel or math function waveform that was originally
saved as a reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also
•
•
•
•
•
702
(see
page
790)
Chapter
32, ":WMEMory<r> Commands," starting on page 693
":WMEMory<r>:DISPlay"
":WMEMory<r>:YOFFset"
":WMEMory<r>:YRANge"
":WMEMory<r>:SKEW"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 696
on page 700
on page 701
on page 699