Configure Mpls Qos-Mapping - Extreme Networks ExtremeWare Command Reference Manual

configure mpls qos-mapping

configure mpls qos-mapping [dot1p-to-exp | exp-to-dot1p] [all |
<input_value>]/<output_value>
Description
Configures MPLS-specific QoS mappings.
Syntax Description
dot1p-to-exp
exp-to-dot1p
all
input_value
output_value
Default
Mapping tables are initialized such than an
Usage Guidelines
The valid range of integers for the
supported:
• dot1p-to-exp
• exp-to-dot1p
Dot1p-to-exp Mappings
The dot1p-to-exp mappings are used by the ingress LSR. When a non-MPLS ingress frame arrives at the
MPLS module, the frame always contains an IEEE 802.1p priority field.
The value of the priority field is set based on the QoS classification performed by the ingress I/O
module. The ingress I/O modules assign each packet to a hardware queue, based on the configured
ExtremeWare QoS policies. There is a one-to-one mapping between the hardware queue and the 802.1p
priority values that are inserted into frames forwarded to the MPLS module. For example, the 802.1p
priority value is set to 0 for frames forwarded from hardware queue 0, set to 1 for frames forwarded
from hardware queue 1, and so on.
The dot1p-to-exp table maps 802.1 priority values to MPLS EXP values. The table is completely flexible,
such that any 802.1p priority
output_value is set in the MPLS header of the packet as it is forwarded to the MPLS network.
ExtremeWare 7.5 Command Reference Guide
Specifies that mappings are used in performing the ingress LSR function. The value in this
priority field is set based on the QoS classification performed by the ingress I/O module.
Specifies that mappings are used when performing label swapping as an intermediate LSR and
when performing the egress LSR function.
Specifies to map all input values to the specified output value.
Specifies an input value.
Specifies an output value.
<input_value>
<input_value>
of n is mapped to an
<input_value>
and the
<output_value>
can be mapped to any EXP
configure mpls qos-mapping
<output_value>
is 0 to 7. Two mappings are
. The EXP
<output_value>
of n.
2457