Configure Mpls Ldp Acl Add Peer - Extreme Networks ExtremeWare Command Reference Manual

configure mpls ldp acl add peer

config mpls ldp acl add [peer <ipaddress> | <host_name>]
Description
Adds an LDP peer to the ACL.
Syntax Description
ipaddress
host_name
Default
N/A
Usage Guidelines
This command adds an LDP peer to the ACL. The acl keyword is used to configure an LDP peer that is
allowed to establish LDP peer session with this LSR. Up to 256 peers may be configured. The
parameter identifies the peer from which targeted and non-targeted LDP sessions are
ipaddress
accepted. If the peer is specified using the
that the
host_name
included in the acl list are ignored.
Example
None
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch only
ExtremeWare 7.5 Command Reference Guide
Identifies the peer from which targeted and non-targeted LDP sessions are accepted.
Identifies the peer. Must be able to be resolved to an IP address.
can first be resolved to an IP address. LDP Hellos from IP addresses that are not
parameter, the DNS client must be configured so
host_name
configure mpls ldp acl add peer
2449