Unconfigure Mpls Qos-Mapping - Extreme Networks ExtremeWare Command Reference Manual

unconfigure mpls qos-mapping

unconfigure mpls qos-mapping [dotp-to-exp | exp-to-dot1p | lsp <lsp_name>]
Description
Restores the default values for the specified QoS mapping table.
Syntax Description
dot1p-to-exp
exp-to-dot1p
lsp_name
Default
N/A.
Usage Guidelines
The default contents of either QoS mapping table maps an input value of n to an output value of n.
Example
The following command restores the default values for the dot1p-to-exp QoS mapping table:
unconfigure mpls qos-mapping dot1p-to-exp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare 7.5 Command Reference Guide
Specifies dot1p-to-exp mapping.
Specifies exp-to-dot1p mapping.
Specifies the name of an LSP.
unconfigure mpls qos-mapping
2523