Show Mpls Ldp - Extreme Networks ExtremeWare Command Reference Manual

show mpls ldp

show mpls ldp {<ipaddress>} {detail}
Description
Displays MPLS LDP session information for one or all LSP sessions.
Syntax Description
ipaddress
detail
Default
N/A.
Usage Guidelines
Omitting the ipaddress parameter displays LDP session information for all LDP sessions.
This command displays information about the status of LDP peers. Summary information is displayed
for all known LDP peers and LDP peer sessions. If you specify the
information for a single LDP peer is displayed. To display additional information in the comprehensive
detailed format, use the
Displayed summary information includes:
• Peer type (targeted or not targeted)
• Peer status
• Peer sessions
• Peer session state
If you specify the
• LDP error counts
• LDP status timers
• Maximum PDU length
Example
The following command displays MPLS LDP session information for the LDP entity 10.1.1.1:
show mpls ldp 10.1.1.1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
ExtremeWare 7.5 Command Reference Guide
Specifies an IP address.
Specifies to display the information in detailed format.
keyword.
detail
keyword, the following additional information is displayed:
detail
of the LDP peer,
<ipaddress>
show mpls ldp
2511