Configure Vlan Delete Track-Lsp - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

configure vlan delete track-lsp

configure vlan <vlan name> delete track-lsp [<lsp_name> | ipaddress
<ipaddress>/<masklength> | all]
Description
Disables LSP route tracking for an ESRP-enabled VLAN.
Syntax Description
vlan name Specifies an ESRP-enabled VLAN name.
lsp_name Specifies a LSP name.
ipaddress Specifies the IP address of the route entry to be tracked.
all Specifies all LSPs.
Default
N/A.
Usage Guidelines
The - command removes an LSP from ESRP tracking for the specified VLAN. If you
delete track lsp
specify the keyword, all configured LSPs are removed from ESRP tracking for the specified VLAN.
all
Example
The following command disables diagnostic failure tracking for VLAN esrp-1:
configure vlan esrp-1 delete track-lsp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2484 ExtremeWare 7.5 Command Reference Guide