Configure Iparp Max-Pending-Entries - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
configure iparp max-pending-entries
configure iparp max-pending-entries
configure iparp max-pending-entries <number>
Description
Configures the maximum allowed incomplete IP ARP entries.
Syntax Description
number
Specifies a number of maximum IP ARP entries.
Default
256.
Usage Guidelines
Range: 1 - 20480, but cannot be greater than the configured IP ARP max-entries value.
Example
The following command sets the maximum IP ARP entries to 500 entries:
configure iparp max-pending-entries 500
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
1159
Advertisement
Table of Contents
