Table of Contents
Advertisement
Getting Started
Your MERLIN communications system can be tailored to meet your specific com-
munications requirements. To customize your system, you can add a variety of system
features.
The following pages discuss those features and explain the effect they have on your
system. These features are the first ones that should be administered to get your
system up and running. Read through this section and determine which features your
system will use.
SPECIFYING TOUCH-TONE AND ROTARY LINES
Do you have any rotary lines coming into your system?
When first installed, your MERLIN communications system will be set to generate
Touch-Tone signals. If some of your lines are rotary, your system will have to be reset
to accommodate them. If you are not sure whether or you have any rotary lines, call
your local telephone company. You will also need this information to complete the
System Configuration Forms.
CALL RESTRICTIONS
Do you need to limit some voice terminals to incoming calls only, while leaving others
with no limitations?
You may want to restrict some voice terminals to intercom or local calls if, for exam-
ple, the employees using these voice terminals do not need to make outside or long
distance calls. You may also want to restrict voice terminals located in a public area
such as a lobby. If you want the restricted voice terminals to have limited additional
calling capacity, you can set up allowed lists. You can assign one of the following
basic calling ranges to each of your voice terminals:
Outward Call Restricted. Permits intercom calls only, with allowed list(s) for
specific local or toll calls if required.
Toll Call Restricted. Permits intercom and local calls only, with allowed list(s)
for specific toll calls if required.
Unrestricted. All calls permitted.
976-3067
CALL RESTRICTIONS
Restricted
9
Advertisement
Table of Contents
