Table of Contents
Advertisement
Display Language (#303)
Display Language (#303)
Description
This System Programming procedure identifies the language in which display
messages appear if the extension has a system display phone. The language is
set for each extension, so phones in the same system can display different
languages.
Valid Entries
1 = English
2 = Spanish
3 = French
Programming
(See Figure 2-2 on page 2-19 for the location of special programming buttons
s
such as
To change the Display Language setting for an extension:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed.
The current display language displays.
3. To change the display language, press
displays.
4. To change the display language for another extension, press
until the extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
e
and
on system phones.)
f 0 0 s s # 3 0 3
at extension
D
until the appropriate value
n
or
5-87
Advertisement
Table of Contents
