Operation Panel - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 11 Thursday, September 2, 1999 10:03 AM

Operation Panel

1.
Add Paper indicator
Lights when a cassette is empty.
2.
Add Toner indicator
Blinks when toner is about to run out and
lights continuously when toner has run
out.
3.
Check Display indicator
The Check Display Indicator lights to tell
you to read the display.
4.
Receive File indicator
The Receive File indicator lights when an
incoming message was received into
memory. Blinks when confidential recep-
tion file or memory lock file is stored in
the memory. (see P.139 "If an Indicator
Lights up on the Operation Panel").
{ { { { Resolution} } } } key.
5.
The resolution/Halftone is indicated by
these three indicators and can be changed
by the resolution/Halftone. When the In-
dicator is not lit, Standard is selected.
6.
Memory key/ indicator
When the Memory indicator is on, then
memory transmission is in effect, if it is
off, immediate transmission is in effect.
F1 F2
Stamp
Journal
Switch between the two with the {Memo-
ry} key.
{ { { { G4} } } } Selector Key/Indicator
7.
Press to select G4 mode. When this indi-
cator is not lit, G3 is mode. The display
backlight enhances readability.
8.
Control panel Display
The Liquid Crystal Display guides you
through tasks and informs you of the
state of the machine. Messages appear
here. The display consists of two 20-char-
acter lines.
{ { { { Speed Dial/Tel Directory} } } } key
9.
Press the {Speed Dial/Tel Directory} key us-
ing Speed Dialor the Telephone Directo-
ry Feature.
{ { { { Pause/Al Redial} } } } key
10.
The {Pause/Al Redial} key inserts a pause
when you are dialing or storing a fax
number. Or, press the key to redial the
last number dialed. (The redial feature
doesn't work once you've started dialing
a new number.)
11.
Arrow keys
T {Yes}accept
U {No}reject/ {Help} Print help list
Operation Panel
3
TSMS012N
11