Printing A Sample Of Data On The Reports - Ricoh FAX4800L Operator's Manual

AUTOMATICALLY PRINTED REPORTS

Printing a Sample of Data on the Reports

For reference purposes, the machine prints the first few inches of the fax message
on the following reports.
Communication Result Report
File Reserve Report
File Clear Report (Polling Clear Report)
Communication Failure Report
Transfer Result Report
The procedure to switch this feature on or off is as follows. (See page 225 if you
need more information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press
until the settings for switch 04 are
shown.
The setting you need to use is digit 7.
3. If you wish to change the setting, press 7
on the ten key pad.
4. Finish: Yes and Function.
170
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
USER PARAMETER
DEFAULT: 01000000
SWITCH04: 01000000
SWITCH04: 0000 0000
Digit 7 (Double underlined)
0: This feature is off
1: This feature is on
REPORTS
PRINT LIST →
↑
YES TO END ↓
PRINT LIST →
↑
YES TO END ↓