Weinmann OXYWAY Fix I Service Manual page 9

OXYWAY
Fix I, Fix III
Connecting bolt
Disposable
filter
hand-screwed connection
Back Forward
• Example: If you were on page 20 and you clicked the Back button
to skip back to page 10, clicking the Forward button would return
you to page 20.
• Click the Contents button to go to the Table of Contents.
• Click the Previous Page button to go to the previous page.
• Click the Next Page button to go to the next page.
1.3 Function
1.3.1 OXYWAY Fix I, Fix III setup
Housing
with Rib filter
Pressure outlet/
inhalation outlet
Low pressure
The oxygen from the oxygen cylinder enters the pressure reducer
through the connecting bolt with hand-screwed connection and
2 filters in series. When the cylinder valve is open, the cylinder pressure
in the pressure reducer is reduced by a piston with spring to 0.5 bar
to 6 bar depending on the device type.
The cylinder pressure can be read off at the contents indicator.
The pressure reducer is protected against excessive pressure by
a safety valve.
Contents
Contents
indicator
Piston with spring
Safety
valve
High pressure
Previous page
Introduction
Housing cover
Mechanics
OXYWAY EN
Next page
9