Weinmann OXYWAY Fix I Service Manual page 195

264
264
Back Forward
• The driving plate 266 has been removed
(see "16.17.1 Removing the driving plate", page
• The assembly housing cover 275 has been removed
(see "16.18.1 Removing the assembly housing cover", page
• The spring for the piston 262 has been removed
(see "16.19.1 Removing the spring for the piston", page
• The piston 261 has been removed
(see "16.20.1 Removing the piston", page
• The spring for the lifting pin 263 has been removed
(see "16.21.1 Removing the spring for the lifting pin", page
1. Use the pliers to remove the lifting pin with shoulder 265 from the
265
housing cover 264.
16.22.2 Fitting the lifting pin with shoulder
1. Use the pliers to insert the lifting pin with shoulder 265 into the
265 housing cover 264.
2. Fit the spring for the lifting pin 263
(see "16.21.2 Fitting the spring for the lifting pin", page
3. Fit the piston 261
4. Fit the spring for the piston 262
(see "16.19.2 Fitting the spring for the piston", page
5. Fit the assembly housing cover 275
(see "16.18.2 Fitting the assembly housing cover", page
6. Fit the driving plate 266
(see "16.17.2 Fitting the driving plate", page
7. Fit the multistep flow selector 267
(see "16.16.2 Fitting the multistep flow selector", page
8. Fit the hexagon nut 268
(see "16.15.2 Fitting the hexagon nut", page
9. Fit the cover for the multistep flow selector 269
(see "16.14.2 Fitting the cover for the multistep flow selector",
page 187).
Contents
Repairs to OXYWAY Fine I
192).
(see "16.20.2 Fitting the piston", page
OXYWAY
Previous page
188).
189).
191).
193).
194).
193).
192).
190).
189).
188).
188).
EN 195
Next page