Weinmann OXYWAY Fix I Service Manual page 121

Back Forward
• The multistep flow selector assembly 179 has been disassembled
(see "14.17.1 Disassembling the multistep flow selector assembly",
page 101).
• The cover assembly 180 has been disassembled
(see "14.27.1 Disassembling the cover assembly", page
1. Dispose of the multistep flow selector 161.
14.31.2 Fitting the multistep flow selector
1. Pick up the multistep flow selector 161.
2. Assemble the cover assembly 180
(see "14.27.2 Assembling the cover assembly", page
3. Assemble the multistep flow selector assembly 179
(see "14.17.2 Assembling the multistep flow selector assembly",
page 102).
4. Fit the piston 173
5. Fit the spring for the piston 174
(see "14.14.2 Fitting the spring for the piston", page
6. Fit the multistep flow selector assembly 179
(see "14.13.2 Fitting the multistep flow selector assembly",
page 98).
14.32 Replacing the union nut
14.32.1 Removing the union nut
Requirement • The multistep flow selector assembly 179 has been removed
(see "14.13.1 Removing the multistep flow selector assembly",
page 98).
• The spring for the piston 174 has been removed
(see "14.14.1 Removing the spring for the piston", page
• The piston 173 has been removed
(see "14.16.1 Removing the piston", page
• The multistep flow selector assembly 179 has been disassembled
(see "14.17.1 Disassembling the multistep flow selector assembly",
page 101).
• The cover assembly 180 has been disassembled
(see "14.27.1 Disassembling the cover assembly", page
1. Dispose of the union nut 170.
14.32.2 Fitting the union nut
1. Pick up the union nut 170.
2. Assemble the cover assembly 180
(see "14.27.2 Assembling the cover assembly", page
3. Assemble the multistep flow selector assembly 179
(see "14.17.2 Assembling the multistep flow selector assembly",
page 102).
Contents
Repairs to OXYWAY Fast I, OXYWAY Fast I+, OXYWAY Fast III
(see "14.16.2 Fitting the piston", page
Previous page
113).
114).
101).
99).
99).
100).
113).
114).
OXYWAY EN 121
Next page